Having a robust lockout/tagout program which includes a well-rounded training program is the best way to help keep your employees safe while performing maintenance tasks on equipment.
If you haven’t invested in lockout/tagout training at all or if your LOTO training is a bit lackluster, then it’s time to invest in this training.
When equipment or machinery breaks down or needs to be serviced, it usually means an employee must interact with the parts of the equipment inside the “danger zone” in order to fix the problem. Any time this occurs, the employee is at risk of being injured or killed unless the energy is controlled.
This is where the importance of LOTO training comes in. If you’re updating your program, here’s a quick overview of the essentials of lockout/tagout training.
There are three overall training requirements within the lockout/tagout standard:
Lockout/tagout training is important for several reasons.
For starters, it’s the law. Per 29 CFR 1910.147(c)(7) which is the standard for the control of hazardous energy, employers are required to provide LOTO training.
Another reason why LOTO training is important is because part of every LOTO procedure should be steps for properly powering down the equipment and machinery. When equipment is properly powered down, it can prolong the life of the equipment and make it more reliable.
But the most important reason for providing training is to protect the workforce from harm. If employees aren’t properly trained on the methods and means of identifying hazardous energy and protecting themselves from it, they might be seriously injured or killed.
As if those aren’t good enough reasons, OSHA estimates that an estimated 120 fatalities and nearly 50,000 injuries per year are avoided when employees are properly trained and follow proper lockout/tagout procedures.
That’s a lot of employee injuries and fatalities avoided! In fact, to put those numbers into perspective, 50,000 is more than the entire seating capacity of Wrigley Field—by 8,351!
Your LOTO training program is a big part of your overall workplace safety program. Without it, employees performing maintenance on equipment and machinery face serious potential hazards.
If you’re looking to create a LOTO training program and don’t know where to start or if you’re maybe just in a training rut and are in the market for ideas to improve your existing lockout/tagout training, we can help!
Make sure to join our upcoming webinar to discuss ways to improve your training. During the webinar we will talk about ideas and concepts to enhance and help improve your training program as well as your other safety training.
Who says safety training has to involve a podium and a bored audience? With safety videos, you can make your training materials fast, easy, and accessible to all your employees, regardless of where they access the material.
This is particularly important for content like LOTO, or the control of hazardous energy. It’s a crucial safety topic, but it’s also a dry one. A lockout/tagout video allows you to take advantage of the quirks of the human brain (90% of the information we process is visual, and visual data is processed 60,000 times faster than text).
In the first part of the video, you’ll want to convey the reasons for having a lockout program as well as an introduction to the methods and means needed to properly lockout a piece of equipment.
You’ll also want to include the fact that a lockout program is intended to maintain worker safety by protecting workers from two things:
Basically, the safety goal is to make sure that while workers are performing maintenance and/or other service work on equipment or machinery they aren’t injured or killed by someone starting up the equipment or by uncontrolled energy they encounter.
Part of this introduction should also be to classify the different types of employees within the lockout program and to make sure that the video clearly states who the intended audience is for each segment.
Identifying the type, magnitude and locations of the energy sources supplying power to your equipment and machinery is another primary element to cover in your video.
Common hazardous energy sources include:
It’s important to remember that not all energy sources are as straightforward as they may seem. For example, a piece of equipment may utilize hydraulic energy that is controlled by the electrical energy disconnect.
Another thing to keep in mind is the possibility that by disconnecting one energy source, a secondary energy source may be created. For example, sometimes gravitational energy can become a new source of hazardous energy after disconnecting and bleeding off pneumatic energy.
When creating a video, you don’t need to cover every individual machine, but you should include enough of the equipment that all energy sources and special situations are addressed.
After you’ve introduced some of the energy sources employees will encounter during the course of their workdays, the next topic to consider including in your video should be the actual machine specific energy control procedures you created for each piece of equipment.
In this part of the video, it would be a terrific idea to video a worker going through the steps of a lockout procedure. This will help people who are still relatively new to LOTO understand how these procedures are used in the field. This would also be good time to answer two critical questions your employees might have:
If your company has incorporated a tagout system in lieu of lockout locks, you should include information in your video about this. More specifically, you should include the purpose of the tagout system, the limitations of using tags in lieu of a lockout lock, how tags are to be applied and the rules for removal.
One of the perks of creating a video is that it’s possible to show the actual limitations of using a tag instead of a lockout lock which gives employees a firsthand look at just how limiting tags can be.
Of course, as a safety professional, you know that a lockout/tagout training video won’t do you any good in a vacuum. You have to put it into action, and that’s where we can help.
Our safety training software makes it easy to deliver critical safety content to your employees, testing their performance and seeing real results. Want to see our software in action? Get in touch today to learn more.